• About milk preparation method: The interior temperature is measured to keep you warm, but the hot water temperature at the time of heating will affect the room temperature and container, so we recommend setting the heat temperature between 176 - 175°F (80 - 85°C). (Recommended according to the Ministry of Health, Labor and the World Health Organization (WHO) milk preparation guidelines) In order to reduce the risk of bacteria (sakaki fungus, etc.) that may be contained in milk, completely melt the powder milk in warm water above 158°F (70°C) and allow it to cool until the temperature of human skin • Smart memory function automatically remembers the last set water output and temperature setting so you can use it with just one touch when needed. 1. **After adjusting the water volume, press the mode setting button again, the temperature will automatically go to the warming mode, so you will need to choose a mode again when you change the water volume. (2) The last amount of water used is remembered, so for example, if you are typically setting 12.6 oz (50 g) to make milk, after 100 g) of water is released for another purpose, the last thing you use is remembered. Therefore, please re-set the normal water volume if the water flow is different from the usual setting • Boil at 100 degrees Celsius for 5 minutes to sterilize Helps support baby's health by removing bacteria and residual chlorine in the water • One Touch Automatic Cleaning: Put citric acid or male into the tank and press the button. Everything from the inside of the tank to the nozzle, can be disinfected with boiling water so you can always keep it clean • Built-in Cooling Fan: Unique fan design allows for faster cooling 3 times faster than conventional pots